Hello dear amigurumi lovers…
Here I am sharing free amigurumi models for you. In my article, I will share with you a model and how to make it, and at the end of the article, I will share amigurumi patterns that can generate ideas for you.

You can also easily access other amigurumi crochet models from the headings below.

amigurumi dolls, amigurumi elephants, amigurumi bunnies, amigurumi cats, amigurumi dogs, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi clowns, amigurumi lambs, amigurumi swans, amigurumi bees, amigurumi unicorns, amigurumi foxes, amigurumi gazelles, amigurumi dinosaurs, amigurumi hippos, amigurumi monkeys, amigurumi bears

Body Supplies
• 3.5 mm crochet hook
• scissors
• tapestry needle
• mercerized cotton yarn
100/170m (approximately 30g)
• 100% polyester yarn
100m/230m (about 30g)
• polyfill
• black yarn for stitching the nose and eyes

Scarf Supplies

• 4.0mm crochet hook (for the hat)
• 8.0mm crochet hook (for the scarf)
• scissors
• A shade of 70% acrylic/30% yarn 100g/177m (I opted for la sedificada from Pingouin)
• 2.5mm pompom maker
• Chunky Acrylic yarn (100g/50m)
• A set of oval safety eyes 9x11mm

Blanket Supplies

• 3.5 mm crochet hook
• scissors
• tapestry needle
• mercerized cotton yarn 100g/170m (approx. 30g)
• hot glue
• 5cm pompons
• 30cm t-shirt yarn

Abbreviations:

This pattern is composed using U.S.A. terminology.
dec decrease (sc 2 stitches together)
inc increase (sc in specified stitch 2 times)
sc single crochet
ch chain stitch
slst slip stitch
st stitch
hdc half double crochet
dc double crochet
MR magic ring

Let’s begin with the snout!
Using cotton yarn and a 4.0mm crochet hook

Snout
1.- 6sc in a MR
2.- 6inc =12sc
3.-(1sc, 1inc) x6 =18sc
4 to 6.- 1sc in each st
Finish with a slst and cut the yarn, leaving a long tail to attach the nose to the head.

Lama Body
The lama body is constructed from the legs up to the head.
Legs (make 04).
For legs 01 and 03, trim the yarn after round 10.
For legs 02 and 04, refer to the following instructions.
1.- 6sc in a MR=6
2.- (1inc, 1sc) x 3=9
3,4.- 1sc in each st= 9sc
5.- (2sc, 1inc) x 3=12sc
6,7.- 1sc in each st= 12sc
8.- (3sc, 1inc) x 3=15sc
9,10.- 1sc in each st= 15sc
Finish with a slst and cut the yarn.
For legs 02 and 04, do not cut the yarn. Connect leg 02 to leg 01 with 3sc. Close and cut the yarn.
Then, connect leg 04 to leg 03 with 3sc, create 5ch and make 1sc between legs 01 and 02.
Now, you have a section completed. We will proceed to craft the body in rounds.
Place a marker on the 2nd sc of the 1st leg.

1.- Create 12sc in the first leg, 1sc between the 1st and 2nd legs, and 11sc in the second leg.
1dec (12thst + 1stch), 1hdc, 1dc, 1hdc, 1dec (5thst + 1st dc of 3rd leg).
11sc in the 3rd leg.
1sc between the 3rd and 4th legs.
11sc in the 4th leg, 1dec (12thsc of the 4th leg + 1stch)
1hdc, 1dc, 1hdc
1dec (5thst + 1stsc of the 1st leg)= 56sc.

2.- 23sc, 1dec, 1dc, 1dec, 23sc, 1dec, 1dc, 1dec=52sc
3.- 24sc, 1hdc, 25sc, 1hdc, 1sc=52sc
At this point, if desired, it’s time to switch yarns.
4 to 7.- 1sc in each sc=52sc
8.- 9sc, 1dec, 7sc, 1dec, 32sc=50st
9.- 9sc, 1dec, 5sc, 1dec, 32sc=48st
10.- 9sc, 1dec, 3sc, 1dec, 32sc=46sc
11.- 9sc, 1dec, 1sc, 1dec, 32sc=44sc
12.- 11sc.
Ensure the last sc is positioned in the center back of the llama. If not, add extra sc as needed.
Join both sides of the piece with 13slst, leaving 17st unworked at the other end of the piece and the body.
Now, firmly stuff the legs and the body, ensuring the llama’s legs are touching the surface together.
Shift the marker to the next st.

Neck
13.- 17sc + 1sc in the center line
14.- 1 sc in every st= 18sc
15.- (7sc, 1dec) x 2=16sc
16.- 1 sc in every st= 16sc
17.- (6sc, 1dec) x 2=14sc
18,19.- 1 sc in every st= (14sc)
20.- (5sc, 1dec) x 2=12sc
21.- 1 sc in every st= 12sc
Firmly stuff the neck.

Head
22.- (1sc, 1inc) =18sc
23.- (2sc, 1inc) =24sc
24.- (3sc, 1inc) =30sc
25 to 30.- (6 rounds) 1sc in every st= 30st
31.- (3sc, 1dec) x 6= 24sc
Pause now! It’s time to attach the nose to the head and place the safety eyes!
32.- (2sc, 1dec) x 6= 18sc
33.- (2sc, 1dec) x6=12sc
34.- 6dec=6sc
Finish with slst leaving a tail to sew.

Tail
1- 6sc in a MR
2- (2sc 1 inc) x2= 8sc
3- to 6 1sc in every st= 8sc
Leave a lengthy tail to sew onto the body.

Ears (Make 2)
1.- 4sc in a MR =4sc
2.- (1sc, 1inc) x 2= 6sc
3.- (2sc, 1inc) x 2= 8sc
3 to 8- 1sc in every st= 8 sc
Assemble the llama.

Hipster Hat
1.- Create 8hdc in a MR, close with a slst, ch2
2.- 8hdcinc= 16hdc, close with a slst, ch2
3.- (1hdc, 1hdcinc) x 8= 24hdc, close with a slst, ch2
4- 1hdc in every hdc=24 close with a sl, ch2
5.- (2hdc, 1hdcinc) x 8=32 hdc, close with a slst, ch2
6.- 4hdc, 4ch (miss 4hdc) 8hdc, 4ch (miss 4hdc) 12hdc =32sc, close with a slst, ch2
7.- 4hdc, 4hdc in the chain, 8hdc, 4hdc in the chain, 12hdc = 32hdc, close with a slst, ch2
8 and 9.- 1hdc in every hdc= 32hdc.
Finish with a slst and conceal the yarn.
Place the pompom on top of the hat.

Infinity Scarf
With the chunky yarn selected, make numerous chains as needed to create two rounds around the llama’s neck. Make 2 additional chains and form the circle.
1-Ch2, make 1hdc in each chain and seal with a st.
Hide the yarn.

Glasses
If you lack amigurumi glasses, feel free to improvise with 2 rings for a keychain and some fine black yarn!!!! I used Bella cotton yarn (100g/450m)
1-With an appropriate crochet hook for thin yarn, create some sc as necessary to wrap the first ring (23sc using Bella yarn). Close with a slst. Don’t cut the yarn.
2-Ch5, wrap the second ring with necessary sc, close with a slst.
3-Make 5slst in every slst of the previous round.
Close with a slst, cut, and hide the yarn. To attach the glasses to the llama’s face, you will need a bit of hot glue in a specific spot.

Blanket
1.- Begin with a 7 chain
In the second from the hook, make a sc and add 5 more sc, 1ch. Turn the work.
2.-16(15 rows) 6sc, 1ch turn
Alternate colors as desired (even 2 or 3 rows).
After the final row, make 1sc around the piece, in every corner, create 3sc.
Hide the yarn.
Secure the blanket to the llama with a 30cm piece of t-shirt yarn. Attach the pompom to the blanket using hot glue.